Pianos consistently make movers annual list of items that are most frequently damaged. Grand pianos are especially problematic. Practicing the following procedures for disassembling, padding and filling grand pianos will avoid damage, lower claims cost, and improve customer satisfaction.
1) At least 3 individuals are required to deal with a baby grand piano. If the baby grand piano requires to go up or down stairs or if a full or performance grand piano requires to be carried, a minimum of four people are needed.
2) Constantly complete a comprehensive and precise stock. It might be required or preferable to utilize a visual inventory to adequately explain and show pre-existing damage.
3) As numerous parts are disassembled, please location all hardware in a correctly identified parts bag and after that put the parts bag in a "Components Box".
4) Eliminate the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a clean furnishings pad.
5) Disconnect the cover by removing the hinge pins. Have a single person wiggle the cover, holding it opposite the hinge, while a 2nd individual works the pin loose. Please take care not to harm the wood with the pliers or with the pin itself. Cover the jaws of the pliers with a little fabric to assist avoid damage to the wood if necessary. Wrap the lid in a tidy furniture pad.
6) Get rid of the prop that holds the cover open and cover it in a tidy furnishings pad. The prop has a hinge pin and remains in 2 pieces.
7) Remove the pedal assembly and wrap it in a clean furnishings pad. The braces at the back of the assembly rest in slots at each end. When getting rid of the screws, please take care not to drop the braces. In addition, please be especially careful with the push-rods so that they will not get bent. As you face the piano, number the push-rods from delegated right as "1", "2", and "3", by positioning a piece of masking tape with the proper number on each rod. Note: If masking tape is not available, please use correctly identified parts bags for this function. When reassembling at destination, please be sure to put the rods in the proper order so that the pedals will work properly.
8) Pad the piano by positioning a clean rolled furnishings pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to prevent it from tumbling open while you manage the piano. Cover the top of the piano with two tidy furniture pads, nicely folded around the keyboard. Use elastic band to secure the pads. Keep in mind: Please guarantee that the surface area of the piano is dust-free before padding it. Padding an extremely refined surface that is dirty might cause great scratches, specifically on a black lacquer surface.
9) Position a piano board and attach the straps so that it is ready to receive the piano. The raised brace on the piano board must be at the keyboard end of the piano.
10) Get rid of the left front leg by positioning someone below the piano at the left end of the keyboard. The other 2 people ought to support the left front corner. The individual below the piano need to turn the retaining block so that the long end points away from the leg. The screws, if there are any, should then be removed. The "beneath" individual needs to then extricate the piano prior to in fact getting rid of the leg. Make certain to have two people raising the corner of the piano while the 3rd individual eliminates the leg. Note: Please be sure to keep in mind which legs were eliminated from which positions considering that some pianos have legs that are not my response interchangeable.
11) Place the piano on the piano board by reducing the "leg-less" end onto the board. Please be sure to raise the entire piano somewhat while finishing this maneuver to prevent unnecessary pressure on the remaining, attached legs as the piano ideas. Be sure that the piano is focused comfortably against the brace at the end of the piano board.
12) Eliminate the 2 remaining legs and wrap them in clean furniture pads. These legs are kept in location by a "crucial and slot" plan. To remove the leg, slide it inward towards the center of the piano till it comes out of the slot.
13) Protect the piano to the piano board by bringing completions of the straps together and attaching them. Location folded burlap pads over the furnishings pads however under the straps to supply additional security to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, tie the loose ends of the two straps together.
14) To move the piano over a flat, level surface, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.
15) To move the piano read review up or down stairs, utilize the piano board as a skid. After adequately padding the stairs for defense versus house damage, position the keyboard end of the piano towards the bottom of the stairs. Attach a hump strap to the leading end of the piano board to avoid the piano from slipping.
16) To fill the piano, leave it on the piano board and location it in a tier as the very first base item with the keyboard facing the wall of the preceding tier. The finest location to load the check my blog cushioned cover is between the piano and the preceding tier or between the piano and the wall.
Although grand pianos represent a significant challenge, they can be moved without damage by utilizing typical sense and practicing the procedures listed above.